ON
When ON, the keypad will be locked if not used in 8 seconds.
Pressing the key for 2 seconds will unlock the keypad.
17 Alarm Mode
On Site Sounds alarm through your radio speaker only
Send Sound Transmits a cycling tone over-the-air
Send Code
Transmits '119' (911 in reverse) followed by the ANI code
over-the-air
18 Alarm Tone
OFF The radio speaker blocks the alarm sound.
ON The radio speaker sounds an alarm
19 ANI-Edit 100
View the ANI ID, and if necessary, will allow to change the ANI ID
20 DTMF-ST
OFF No DTMF Side Tones are heard
DT-ST Side Tones are heard only from manually keyed DTMF codes
ANI-ST Side Tones are heard only from automatically keyed DTMF codes
DT+ANI All DTMF Side Tones are heard
21 PTT-ID
OFF No ID is sent.
BOT The selected S-CODE is sent at the beginning
EOT The selected S-CODE is sent at the ending
BOTH The selected S-CODE is sent at the beginning and ending
22 PTT-DLY 100-3000ms Signal code sending delay. PTT-ID Delay (milliseconds)
23 ALERT
1000Hz
The following configurations will transmit accordingly:
PTT + SK3 = Transmits 1000Hz Tone Burst
1450Hz PTT + SK3 = Transmits 1450Hz Tone Burst
1750Hz PTT + SK3 = Transmits 1750Hz Tone Burst
2100Hz PTT + SK3 = Transmits 2100Hz Tone Burst
24 TAIL
OFF Disable Squelch Tail Elimination.
ON
Enable Squelch tail elimination. to prevent any squelch tails from
being heard.
25 Press SK2
FM Radio FM radio on/off
Search Search on/off
Scan Scan on/off
To Next Page
Loading...
