RadioLink t8fb User Manual

RadioLink Electronic Limited
www.radiolink.com
20
2. The F/S (Fail-safe) function can be used in certain competitions to ensure safe landing of
the model prior to flying away and dropping. Besides, it can also be used make all servos neutral
to maximize the flight time.
3.2.5 DELAY
Adjusts the synchronous ratio between the servos position and the actual operation. The
default value is 100 by factory setting meaning no delay.
The interface of parameter setup APP on phone.
The interface of parameter setup software on computer.

RadioLink t8fb Specifications

General

Channels	8
Frequency	2.4GHz
Modulation	FHSS
Spread Spectrum	Yes
Output	PPM
Compatibility	R8EF, R8FM
Battery	4 x AA batteries
Power Supply	4 x AA batteries