− Move the cursor to a field “Database of thresholds (limits)” and press RIGHT
ARROW KEY
Fig. 38. Checkweighing – programming database of thresholds –
inserting thresholds values
− Enter a name for a selected record (name of a product to be weighed)
− Enter the value of HI threshold (limit)
− Enter the value of LO threshold (limit)
− Accept entered values by double pressing of ENTER key
Fig. 39. Checkweighing – mode operation with enabled checkweighing
limits
− Move the cursor to a field “START” and press RIGHT ARROW KEY
− The balance is ready to weigh a product with set checkweighing thresholds (limits)
To Next Page
Loading...
