Radwin RW 2000 Series User Manual

Page 36
June 2023
Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com
3. Remove the Pole Clamp and thread
the two metal worm drive clamps into
the holes of the ODU Holder.
4. Mount the mounting kit on the ODU by inserting the M8X40 Hex Head Screw in the
hole of the ODU.
5. Tighten the M8 Flange
Nut with a torque of 15
Nm until the mounting
kit is firmly on the ODU.
6. Tighten both worm drive clamps
using a screwdriver until the ODU is
secure on the pole.

Radwin RW 2000 Series Specifications

General

Brand	Radwin
Model	RW 2000 Series
Category	Network Router
Language	English