Radwin RW 2000 Series - Page 35

Page 35
June 2023
Corporate Headquarters | T. +972.3.766.2900 | E. sales@radwin.com | www.radwin.com
7. Tighten both M8 Flange Nuts with a torque of 15 Nm until firmly secure on the pole.
Thin Vertical Pole ¾” ‐1½”
Medium Vertical Pole 2 - 3”
Thick Vertical Pole > 3”
1. Remove the mounting kit
from the ODU packaging
box.
2. Remove the M8X40 Hex Head
Screw and the M8 Flange Nut
from the mounting kit.