WinLink 1000 Installation and Operation Manual Chapter 1 Introduction
WinLink 1000 constantly monitors the data transmission process,
evaluates received signal strength, and signal quality. It also monitors
received traffic and frame rate (FPS) for local and remote units.
Optional External Antenna
WinLink 1000 supports configuration of an external antennae. In this
configuration, the radio supplies an N-type connector that connects
through a coax cable to the external antenna.
An external antenna can extend the range of the link, and in some
cases, it might help to reduce environmental interferences. Various
external antennae are available for the WinLink 1000 operating
frequencies.
For example, an optional flat panel 28 dBi external antenna increases
the operation range of WinLink 1000 up to 80 km (50 miles).
Overview 1-3
To Next Page
Loading...
