WinLink 1000 Installation and Operation Manual Chapter 2 Installation and Setup
Installation and Setup 2-13
Figure 2-9. Installation Wizard, Channel Select dialog box
9. Select the required operating channel.
The pull down list shows the ISM frequencies available.
The Manual option allows you a User defined channel, within the
system frequency band.
Selecting a new channel causes the system quality to change. The
quality bar shows the adjustment until the system finds the best
quality link.
The installation of products that support automatic channel selection is
performed in a user defined channel, called the installation channel.
After selecting the channel, the list of channels for automatic channel
selection can be modified.
To Next Page
Loading...
