Chapter 3 Configuration WinLink 1000 Installation and Operation Manual
Figure 3-3. Link Configuration, System dialog box
5. In the System dialog box, enter the new data to for the link. All
fields with a white background can be edited.
6. Click Next.
The Frequency dialog box appears (see
Figure 3-4
).
For releases 1.1.6 and above, refer to Figure 3-6 on page 3-6.
For 5.4GHz DFS according to ETSI standard, refer to
Figure 3-6 on
page
3-7.
7. Select the required operating channel frequency.
3-4 Performing Configuration of WinLink 1000
To Next Page
Loading...
