Chapter 2 Installation and Setup WinLink 1000 Installation and Operation Manual
2-8 Installation and Setup
3. Connect the management station to the LAN.
Any PC running the WinLink 1000 Management application can be used
to configure WinLink 1000 units.
Î
To start WinLink manager:
1. From the Start menu, point to Programs, point to WinLInk Manager,
and then click WinLink Manager.
The password/IP request dialog appears.
Figure 2-3. Login Screen
2. Select the suitable option for the IP Address field:
Enter the IP address of the ODU —
default value 10.0.0.120
.
The IP address is defined later during link configuration.
(optional) If user is connected directly to the IDU LAN port, use
the adjacent list arrow to select Local Connection.
Note
To Next Page
Loading...
