Chapter 2 Installation and Setup WinLink 1000 Installation and Operation Manual
2-16 Installation and Setup
Figure 2-12. Installation Wizard, Rates dialog box
11. Select a suitable air interface rate according to the services
required.
12. Click Evaluate.
13. A question box pops up, asking if you want to re-evaluate the link.
Click Yes to change the rate No to keep the existing rate.
Selecting a new rate causes the system quality to change. The
quality bar shows the adjustment until the system finds the best
quality link.
14. Click Next.
The Service Parameters dialog box appears (see
Figure 2-13
).
To Next Page
Loading...
