Chapter 2 Installation and Setup WinLink 1000 Installation and Operation Manual
2-12 Installation and Setup
Figure 2-8. Installation Wizard, System dialog box
4. Enter a SSID (System ID) minimum of eight characters. The ID is
initially factory set.
•
Both sites of a link must always have the same number
5. Enter Link name for the link identification.
6. Enter a name for site 1.
7. Enter a name for site 2.
8. Click Next.
The Channel Select dialog box appears (see
Figure 2-9
for
previous releases).
For release 1.1.6 and above refer to Figure 2-10, page 2-14.
For 5.4GHz DFS according to ETSI standard, refer to
Figure 2-11 on
page
2-15.
To Next Page
Loading...
