WinLink 1000 Installation and Operation Manual Chapter 2 Installation and Setup
Installation and Setup 2-17
Figure 2-13. Installation Wizard, Services dialog box
15. In the Service dialog box, select one of the following:
E1/T1 – Select the E1/T1 field, if you intend to transmit E1/T1
data and Ethernet data.
The Ethernet BW field shows the remaining bandwidth in Mbps
available for Ethernet. The available bandwidth depends on the
number of E1/T1 ports selected.
Select the Ethernet field, if you intend to transmit Ethernet data
only
16. Click Next.
The Finish screen appears (see
Figure 2-14
).
The Finish screen shows a summary of the link configuration,
the alignment is complete.
To Next Page
Loading...
