Raisecom ISCOM RAX711 - Features

Raisecom
ISCOM RAX711 (B)Product Description
Raisecom Technology Co., Ltd.
2

Support ITU-T G.8031 Ethernet Linear Protection Switching (ELPS) and ITU-T G.8032
Ethernet Ring Protection Switching (ERPS). The Automatic Protection Switching (APS)
time is less than 50ms.

Support hardware-based IEEE 802.1ag end-to-end link fault management.

Support hardware-based end-to-end Service Level Agreement (SLA) features, such as
testing delay, jitter, and packet loss rate.

Support Y.1564.

Support Auto-Provisioning.

Support strict QoS guarantee.

Support Layer 2 loopback protocols.

Support hierarchical rate limiting in the ingress interface direction.

Provide the SNMP interface.

Support monitoring multiple ways of voltage and temperature.

Support power failure alarms, namely, Layer 2 Dying Gasp.

Support 1+1 power protection and hybrid input of AC power and DC power.

Support EMI Class B.

Support Anti-Static Discharge (ASD) interference.
1.3 Features
Table 1-1 lists features of the ISCOM RAX711.
Table 1-1 Features
Feature
Description
Basic features

Accessing the device (RJ45 Console/Telnet/SSHv2)

CLI

Managing files (BootROM/system files/configuration files)

Load and upgrade (TFTP auto-loading, upgrade from BootRom, and
upgrade from FTP/TFTP)

Time management

Managing interfaces

Basic information (device name, language mode, saving/deleting
configurations, and restarting the device)

Task scheduling
Ethernet

MAC address (32K addresses)

Jumbo frame

Maximum frame length (12 KBytes)

VLAN (4094 VLANs)

User VLAN

QinQ

1:1 VLAN mapping

Loopback detection

Interface protection

Port mirroring

L2CP