Raisecom ISCOM RAX711 - Ordering Information about Auxiliary Parts; Table 1-4 Models and Parameters of Power Modules

Raisecom
ISCOM RAX711 (B)Product Description
Raisecom Technology Co., Ltd.
5
Model
Description
ISCOM RAX711

Support four 10/100/1000 Mbit/s Combo downlink
interfaces.

Support two 10/100/1000 Mbit/s SFP uplink interfaces.

Support the RJ45 Console interface.

Support the SNMP interface and out-of-band network
management.

Support hybrid power supply of 110/220 VAC and -48 VDC.
1.4.3 Ordering information about auxiliary parts
The ISCOM RAX711 can be equipped with the following auxiliary parts:

SFP modules

Power modules
For details about SFP models and parameters, see section 6.2 SFP modules.
Table 1-4 lists models and parameters of power modules.
Table 1-4 Models and parameters of power modules
Model
Description
RPA0361-SI-220S12
36 W AC power module

Lightning protection level: 6 kV in both common mode and
differential mode

Input voltage range: 100–240 VAC
Use one of the following power cables:

POL-AC-European standard-3-pin/plum blossom tail-18AWG-
1.5m/RoHS

POL-AC-American standard-3-pin/plum blossom tail-18AWG-
1.5m/RoHS

POL-AC-British standard-3-pin/plum blossom tail-0.75mm
2
-
1.5m/RoHS
RPD0361-SI-48S12
36 W DC power module

Lightning protection level: 4 kV in common mode and 2 kV in
differential mode

Input voltage range: -36 to -72 VDC
This model is delivered with the DC power cable and Phoenix
terminal.