Raisecom
ISCOM2600G (A) Series Product Description
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
The 24 Ethernet electrical interfaces, numbered 1–24, on the ISCOM2624G-4GE-
PWR and ISCOM2624G-4C-PWR are all PoE interfaces. Each interface corresponds
to one LED which displays the LNK/ACT or PoE power supply status in different
modes. You can switch the status through the Mode button. When the LEDs are in
PoE status, they are the power supply LEDs of the corresponding interfaces. When
the PoE LEDs are off, they are switched to the LNK/ACK status displaying the
LNK/ACK LEDs of the corresponding interfaces.
LEDs 1–24 are in LNK/ACT status by default. In this case, the PoE LEDs are off. If
you press the Mode button, the LEDs will be switched to the PoE status. Then if you
press the Mode button again, the LEDS will be switched to the LNK/ACT status again.
When the PoE LEDs are on and the Mode button has not been pressed within 10s,
the system will automatically switch them to the LNK/ACT status and meanwhile the
PoE LEDs become off.
To Next Page
Loading...
Need help?
General
