Raisecom ISCOM6820-GP Installation Guide

Raisecom
ISCOM6820-GP (A) Installation Guide
5 Connecting cables
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
27
5 Connecting cables
This chapter introduces the cable connection operation processes and precautions.

Connecting DC power cable

Connecting AC power cable

Connecting Ethernet cables

Connecting optical fibers

Connecting configuration cables
5.1 Connecting DC power cable

DC power cable terminals and other unnecessary exposure should be fully
insulated.

Disconnect all related power when connecting a DC power cable.
Connect the DC power cable according to the following steps.
Step 1 Check whether the ground cable has been properly grounded.
Step 2 Insert the DC cable plug into the power outlet on the front panel of the DC module, as shown
in Figure 5-1.

Raisecom ISCOM6820-GP Specifications

General

Brand	Raisecom
Model	ISCOM6820-GP
Category	Network Hardware
Language	English