R&S ESU Series - Page 782

Operating Manual 1302.6163.12 - 03 6.343
R&S ESU Remote Control – Description of Commands
Alphabetical List of Remote Commands
INSTrument:COUPle:GAIN ALL | NONE 6.136
INSTrument:COUPle:MARKer ALL | NONE 6.136
INSTrument:COUPle:PRESelector ALL | NONE 6.136
INSTrument:COUPle:PROTection ALL | NONE 6.137
INSTrument:COUPle:SPAN ALL | NONE 6.137
INSTrument:NSELect <numeric value> 6.134
INSTrument[:SELect] SANalyzer | RECeiver | IFANalyzer |
ADEMod | APD
6.134
MMEMory:CATalog:LONG? <path> 6.139
MMEMory:CATalog? <path> 6.138
MMEMory:CDIRectory <directory_name> 6.139
MMEMory:CLEar:ALL 6.140
MMEMory:CLEar:STATe 1,<file_name> 6.139
MMEMory:COMMent <string> 6.140
MMEMory:COPY <file_source>,<file_destination> 6.140
MMEMory:DATA <file_name>[,<block data>] 6.140
MMEMory:DELete <file_name> 6.141
MMEMory:DELete:IMMediate <file_name> 6.141
MMEMory:LOAD:AUTO 1,<file_name> 6.142
MMEMory:LOAD:STATe 1,<file_name> 6.142
MMEMory:LOGO:CDIRectory <directory_name> 6.142
MMEMory:LOGO:NAME <file_name> 6.143
MMEMory:MDIRectory <directory_name> 6.143
MMEMory:MOVE <file_source>,<file_destination> 6.143
MMEMory:MSIS <device> 6.143
MMEMory:NAME <file_name> 6.144
MMEMory:RDIRectory <directory_name> 6.144
MMEMory:SELect[:ITEM]:ALL 6.145
MMEMory:SELect[:ITEM]:CLISt ON | OFF 6.145
MMEMory:SELect[:ITEM]:DEFault 6.145
MMEMory:SELect[:ITEM]:FINal ON | OFF 6.146
MMEMory:SELect[:ITEM]:HCOPy ON | OFF 6.144
MMEMory:SELect[:ITEM]:HWSettings ON | OFF 6.146
MMEMory:SELect[:ITEM]:LINes:ALL ON | OFF 6.146
MMEMory:SELect[:ITEM]:NONE 6.147
MMEMory:SELect[:ITEM]:SCData ON | OFF 6.147
MMEMory:SELect[:ITEM]:TRACe[:ACTive] ON | OFF 6.147
MMEMory:SELect[:ITEM]:TRANsducer:ALL ON | OFF 6.147
MMEMory:STORe:FINal <file_name> 6.147
MMEMory:STORe<1|2>:MARKer <file_name> 6.148
MMEMory:STORe<1|2>:PEAKlist <file_name> 6.148
MMEMory:STORe<1|2>:SPURious <file_name> 6.148
MMEMory:STORe<1|2>:STATe 1,<file_name> 6.149
MMEMory:STORe<1|2>:TRACe 1 to 3,<file_name> 6.149
OUTPut:UPORt:STATe ON | OFF 6.151
OUTPut:UPORt[:VALue] #B00000000 to #B11111111 6.151
OUTPut<1|2>[:STATe] ON | OFF 6.151
[SENSe<1|2>:]AVERage:COUNt 0 to 32767 6.153
[SENSe<1|2>:]AVERage[:STATe<1...3>] ON | OFF 6.153
[SENSe<1|2>:]AVERage:TYPE VIDeo | LINear 6.154
[SENSe<1|2>:]BANDwidth|BWIDth:FFT WIDE | AUTO | NARROW 6.155
[SENSe<1|2>:]BANDwidth|BWIDth:IF 10 Hz...100 kHz 6.158
[SENSe<1|2>:]BANDwidth|BWIDth:PLL AUTO | HIGH | MEDium | LOW 6.158
[SENSe<1|2>:]BANDwidth|BWIDth[:RESolution] 10 Hz to 10 MHz 6.155
[SENSe<1|2>:]BANDwidth|BWIDth[:RESolution]:AUTO ON | OFF 6.156
Command Parameter Page