R&S SM300 - Page 104

Error Codes R&S SM300
Version 04 104
Service Manual SM300: 1147.1652.00 Instrument Part No SM300: 1147.1498.03
Parameter Description Detailed description/error location
0×a8 PS_TEMP_1_ERROR (Board Monitor) PS sensor 1 overtemperature
0×a9 PS_TEMP_2_ERROR (Board Monitor) PS sensor 2 overtemperature
0×b0 USB_HOST_NOT_PRESENT (USB Error) Selected USB host is not present
0×c0 FIRMWARE_UPDATE (Firmware info) Indication that the firmware has been
updated
Table 5-7: Additional information about event monitor (event 0×6050) parameters