R&S ZNLE Series - Page 157

Network and remote settings
R&S
®
ZNL/ZNLE
157User Manual 1178.5966.02 ─ 20
GPIB Address............................................................................................................. 157
Identification String......................................................................................................157
Reset to Factory String............................................................................................... 157
Remote Display Update.............................................................................................. 158
GPIB Terminator..........................................................................................................158
I/O Logging..................................................................................................................158
Display Remote Errors................................................................................................158
GPIB Address
Defines the GPIB address. Values from 0 to 30 are allowed. The default address is 20.
Remote command:
SYSTem:COMMunicate:GPIB[:SELF]:ADDRess on page 613
Identification String
Defines the identification string for the R&S ZNL/ZNLE which is provided as a
response to the *IDN? query. Maximum 36 characters are allowed.
Remote command:
SYSTem:IDENtify[:STRing] on page 616
Reset to Factory String
Restores the default identification string. Each R&S ZNL/ZNLE has a unique ID
according to the following syntax:
Rohde&Schwarz,ZNL3,<Unique number>
Network and remote control settings