Ransomes Commander 3520 - User Manual

®
RJL 100 August 2011
24345G-FR (rev.6)
FR
France
Safety, Operation & Maintenance Manual
Manuel de sécurité, de fonctionnement et de maintenance
Ransomes Commander 3520
Series: GC
Product code: LGTT020
Série : GC
Code Produit : LGTT020
AVERTISSEMENT : Risque de blessures graves en cas
d’utilisation incorrecte de la machine. Les opérateurs et le
personnel d’entretien doivent être formés et conscients
des dangers encourus. Ils doivent lire avec attention le
manuel avant d’essayer de monter, d’utiliser, de régler ou
maintenir la machine.
WARNING: If incorrectly used this machine can cause
severe injury. Those who use and maintain this machine
should be trained in its proper use, warned of its dangers
and should read the entire manual before attempting to
set up, operate, adjust or service the machine.

Summary

Safety Instructions

Operating Safety Precautions

Comprehensive safety measures for operating the machine.

Safety Signs and Warnings

Explanation of safety symbols and warning levels (DANGER, WARNING, CAUTION).

Controls and Operation

Throttle and Starter Controls

Operation of throttle lever and starter switch for engine control.

Driving Controls

Explanation of forward/reverse pedal and speed control lever.

Cutting Unit Controls

Instrument Panel and Indicators

Operation

Daily Inspection and Safety System Tests

Pre-operation checks and testing the operator presence interlock system.

General Operating Procedures

Mowing on Slopes

Maintenance and Lubrication

Maintenance and Lubrication Chart

Schedule of maintenance tasks based on operating hours.

Engine and Hydraulic System Service

Hydraulic Test Ports

Adjustments

Throttle, Belt, and Wheel Adjustments

Operator Seat Adjustments

Troubleshooting

General Troubleshooting Guide

Common problems and solutions for engine and cutting issues.

Quality of Cut Issues

Diagnosing and resolving problems affecting grass cutting quality.

Ransomes Commander 3520 Specifications