MyVCC - System Management
100 / 153
V-12 - 02/2018 - PM/Stme - English - © RATIONAL
You can create profiles in the MyDisplay menu. Here you can customise your appliance's
user interface according to your requirements and save as a profile.
Download profile
step info/button instructions
1
Insert the USB stick into the interface under the
control panel.
1b
Model 112T/112L: Insert the USB stick into the
port on the front side of the control console.
2 Press the MyVCC button.
3 Press the System management button.
3
Press the Download profile button to load
profiles from the appliance onto the USB stick.
5
The confirmation tick indicates that a function
has been completed successfully. Only remove
the USB stick once Confirm lights up.
To Next Page
Loading...
