MyVCC - System Management
V-12 - 02/2018 - PM/Stme - English - © RATIONAL
95 / 153
Download information data
step info/button instructions
1
Insert the USB stick into the interface under the
control panel.
1b
Model 112T/112L: Insert the USB stick into the
port on the front side of the control console.
2 Press the MyVCC button.
3 Press the System Management button.
4 Press the Download information data button.
5
Click the first date/time field and set the start
date you require for data using the central dial.
Click the second date/time field and set the end
date you require for data using the central dial.
6
Press the button to start the download. A check
mark appears next to the USB stick once the
download has finished.
To Next Page
Loading...
