Programming/Save mode
V-12 - 02/2018 - PM/Stme - English - © RATIONAL
77 / 153
step info/button instructions
8
After saving, press the flashing cooking mode
button to select it again and add another step.
9
After saving, press the "Save End" button to exit
the programming process.
You can set an audible signal to sound at the end of each individual program
step. To do this simply activate the buzzer button in the steps concerned.
A preheating step can only be programmed in the first program step.
You cannot combine the different cooking modes with one another in a manual program. It is
only possible to switch from pan-fry to boil.
To Next Page
Loading...
