Raven AccuFlow - Page 11

2
Manual No. 016-0171-496 Rev. C 7
Introduction
Parts for Fittings and Assemblies (P/N 117-0171-385, Boxed)
The following plumbing components and fittings are included with each Raven AccuFlow™ system:
Note: Refer to Figure 2 on page 13 for a diagram of these fittings and parts.
Parts for Dual Cooler System Fittings and Assemblies (P/N 117-0171-388)
Dual cooler systems (P/N 117-0171-389 and 117-0171-387), as well as the single to dual cooler kit
(P/N 117-0171-390), include the following additional fittings and components:
Note: The single to dual cooler kit (P/N 117-0171-390) also includes an additional AccuFlow™ super
cooler (P/N 063-0173-314).
Qty. Components P/N Qty. Components P/N
1 • Strainer 1-1/2” Valve Assembly 063-0173-309 1 • Pipe, 1/2” x 1/2” x 1/4” Pipe 333-0004-009
3 • U-bolt with Hardware 107-0159-447 1 • Pipe, 1/4” Cross 333-0004-030
2 • Bracket, Cooler Mounting 107-0171-063 1 • Pipe, 1/2” Pipe 90° Elbow 333-0005-003
1 • Bracket, “Z” 107-0171-068 1 • Pipe, 1-1/4” Pipe 90° Elbow 333-0005-006
2 • U-bolt, 5-1/16” x 6” x 7/16” THD 107-0171-603 1 • Pipe, 1-1/2” Pipe 90° Elbow 333-0005-007
2 • Bracket, HP Valve Mounting 107-0171-931 1 • Fitting, 1-1/4” Pipe Union 333-0006-005
1 • Hose, 3/8” EVA 214-0001-035 1 • Pipe, 1/4” x 2” Nipple 333-0008-002
1 • Gasket, Teflon 219-0000-027 1 • Pipe, 1/2” x 1-1/2” Nipple 333-0008-015
2 • Bolt, 3/8”-16 x 1-1/4” 311-0054-106 4 • Pipe, 1-1/4” x 3” Nipple 333-0008-040
4 • Nut, Hex 312-1001-037 2 • Pipe, 1-1/4” x 6” Nipple 333-0008-042
4 • Nut, Flange Lock 312-1001-165 2 • Pipe, 1-1/4” x8” Nipple 333-0008-043
4 • Nut, 5/16” - 18 312-1001-169 1 • Pipe, 1-1/2” x 2” Nipple 333-0008-047
4 • Washer, Split Lock 313-1000-022 1 • Pipe, 1-1/2” x 3” Nipple 333-0008-049
1 • Rope 321-0000-359 1 • Pipe, 1-1/2” x 12” Nipple 333-0008-053
1
• Fitting, 1/4” NPT x 3/8” Hose
Barb
333-0002-004 1 • Fitting, Pipe Plug 333-0009-082
1
• Fitting, 1/2” NPT x 3/8” Hose
Barb
333-0002-006 1 • Valve, 1/4” NPT Bleed 334-0001-012
2
• Fitting, 1/2” NPT x 3/4” Hose
Barb
333-0002-011 1 • Gauge, Pressure (0-150 PSI) 417-0001-008
1 • Bushing,1-1/4” x 1” 333-0003-015 1 • Gauge, Temperature (25-125° F) 417-0001-009
2 • Bushing, 1-1/4” x 1/2” Pipe 333-0003-017 2 • Clamp, Worm Drive Hose 435-3003-002
1 • Bushing, 1-1/2” x 1-1/4” Pipe 333-0003-019 2 • Clamp, Muffler 435-3003-030
2 • Pipe, 1-1/4” Tee 333-0004-006
Qty. Components P/N Qty. Components P/N
1
• Strainer 1-1/2” Valve
Assembly
063-0173-309 2
• Fitting, 1/2” NPT x 3/4” Hose
Barb
333-0002-011
2 • U-bolt with Hardware 107-0159-447 1
• Bushing, 1-1/2” x 1-1/4”
Reducing
333-0003-019
2 • Bracket, Cooler Mounting 107-0171-063 1 • Tee, 1/2” Pipe 333-0004-003
1 • Hose, 3/8” EVA 214-0001-035 1 • Tee, 1-1/2” Pipe 333-0004-007
1 • Gasket, Teflon 219-0000-156 1 • Fitting, 1-1/2” Pipe 90° Elbow 333-0005-007
2 • Bolt, 3/8” x 1-1/4” 311-0054-106 1 • Fitting, 1-1/2” Pipe Union 333-0006-006
4 • Nut, 3/8” Hex 312-1001-037 1 • Pipe, 1/2” x 2” Nipple 333-0008-016
4 • Washer, 3/8” Split Lock 313-1000-022 3 • Pipe, 1-1/2” x 2” Nipple 333-0008-047
1 • Rope 321-0000-359 1 • Pipe, 1-1/2” x 3” Nipple 333-0008-049
1
• Fitting, 1/4” NPT x 3/8” Hose
Barb
333-0002-004 2 • Clamp, Worm Drive Hose 435-3003-002
1
• Fitting, 1/2” NPT x 3/8” Hose
Barb
333-0002-006