CHAPTER
1
Manual No. 016-0171-496 Rev. C 1
C hapter 1
Important Safety
Information
• Read this manual carefully before installing the AccuFlow™ system.
• Review procedures for safe handling and use of anhydrous ammonia (NH
3
) with a local NH
3
supplier.
If you are not trained to handle anhydrous ammonia, contact a local NH
3
supplier or the appropriate
agricultural department for information on training.
• Please review the operation and safety instructions included with the implement and/or controller.
• Follow safety information presented within this manual and review operation of the AccuFlow system with a
local anhydrous ammonia (NH
3
) supplier.
• Follow all safety labels affixed to the AccuFlow system components. Be sure to keep safety labels in good
condition and replace any missing or damaged labels. To obtain replacements for missing or damaged
safety labels, contact a local Raven dealer.
• Do not attempt to modify or lengthen any of the system control cables. Extension cables are available from
a local Raven dealer.
• If you require assistance with any portion of the installation or service of Raven equipment, contact a local
Raven dealer for support.
1. Anhydrous Ammonia (NH
3
) Under Pressure. Anhydrous ammonia can cause severe burning, blindness, or
death. Carefully read and follow all safety instructions and warnings before operating or servicing
equipment.
2. Always wear proper personal protective equipment when working with the AccuFlow system and anhydrous
ammonia. Appropriate protective clothing includes, but is not limited to:
• Goggles or face shield
• Protective suit and gloves
• Respirator
3. DO NOT allow any one to operate the AccuFlow system without proper instruction and training.
NOTICE
DANGER
To Next Page
Loading...
