Raven AccuFlow - Page 63

8
Manual No. 016-0171-496 Rev. C 59
Troubleshooting
Issue 5:
Indictor light(s) on specific keys will not illuminate.
Solution:
The console may require repair. Contact a local Raven dealer for further assistance.
Issue 6:
Console displays flashing “CAL” whenever vehicle engine is started.
Solution:
1. Check battery voltage.
2. Console power may be toggled by the vehicle’s ignition switch or connected to a “dirty” power source. Verify
that the power leads from the console cable are connected directly to the battery, not chassis ground or
another power source.
Issue 7:
Console displays flashing “CAL” whenever the master switch is toggled on or off.
Solution:
1. Check battery voltage.
2. Console power may be connected to a “dirty” power source. Verify that the power leads from the console
cable are connected directly to the battery, not chassis ground or another power source.
Issue 8:
Console’s TIME feature is inaccurate or drifts.
Solution:
The console may require repair. Contact a local Raven dealer for further assistance.
Issue 9:
Display digits are missing segments.
Solution:
The console may require repair. Contact a local Raven dealer for further assistance.