Raven RGL 600 - Separate Headlands with Tape Measure Menu Navigation Diagram

12
Separate Headlands with Tape Measure Menu Navigation Diagram
Menu Navigation Diagram #4 conditions:
 Tape Measure is ON
 Headlands control is Separate (SEP)
 Headlands, A-B marks, and DIRection are set
enter Configuration Mode
RGL
600
TPO ACR 2 SAV
Operational Mode
Menu Navigation Diagram #4
CLR A-B
CLR SAV
Decrement
Swath #
Advance
Swath #
Decrease
Brightness
Set Tape
Reference point
Save
Position
Increase
Brightness
Power
ON
Skipped if a Position
is Saved
Skipped if
no Position
is Saved
Swath Number
Clear
ALL
Clear
Headlands
Clear
A-B
Clear
Saved
Position
CLR ALL
CLR HDL
BRT
We are 2 feet right and parallel to the swath line. Approaching Headlands.
Main Screen
Swath Navigation
(Headland boundary
is 12 ft ahead)
SELECT advances
DOWN decrements
swath.
press
SELECT to
Save current positio
n
SELECT clears
A-B, HDL,
and Saved Position
SELECT
clears
Saved Position
only
if there is a Saved Position
Save
Current Position
SELECT
clears
HDL only
SELECT
clears
A-B only
SELECT
sets
Tape Reference
Point
We are 184 feet from the
Tape Reference point
which is left and behind.
Area defined by
marked Headlands
is 1.55 acres
press DOWN to clear
separate items
Center green LED's indicate we are Leaving the Save Position Zone
press and hold
DOWN
to enter
Configuration Mode