Raven RGL 600 - CKS Program Memory Checksum; SET..DEF - Reset Smartbar Configuration Settings to Default Values

26
THE SMARTBAR CONFIGURATION MODE (continued)
DSP - Diagnostic Built-In Testing (continued)
CKS Program Memory Checksum
Press the SELECT button to execute a program memory checksum calculation. The
calculated 8 Hexadecimal digit checksum is displayed in 4 display cycles. (see below)
Firmware program integrity is validated if the indicated checksum matches a known or
published checksum for the current version.
SET..DEF - Reset Smartbar configuration settings to default values
WARNING: All existing Smartbar configuration settings will be erased.
Press the SELECT button to reset all Smartbar configuration settings to default values.
When the SELECT button is pressed, the Smartbar will restart to the home screen with
default values for all configuration settings.
SER..NUM - Smartbar 6 digit Unit Serial Number
This Serial Number matches the Model/Serial Number tag on the back of your Smartbar.
It is important to supply this Serial Number when requesting product or technical
support.
TPF Internal Board Temperature in F
o
(Farenheit).
TPC Internal Board Temperature in C
o
(Celsius).
Temperature display menu only available in RGL600 with Tilt option installed.
Display sequences
between
[a], [b], [c], [d], [e
].
showing the
Hexadecimal numb
er
'1234FE78'
[
a]
[
b]
[
c]
[
d]
[
e]
[
a]
[
b]
Display sequence
s
between [a] and [b
]
showing
Serial Number
314159