EasyManua.ls Logo

Raven RGL 600 - GPS - GPS Receiver Status Monitoring

Raven RGL 600
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
The Smartbar Configuration Mode (continued)
GPS - GPS Receiver Status monitoring
GPS GPS Status Indication (display only)
D3X GPS Mode and Number of Satellites (display only)
HDP Horizontal Dilution Of Precision (HDOP) (display only)
AOD Age Of Data (display only)
SOG Speed Over Ground (display only)
When using a Raven receiver and SYS-GPS is set to INV, the GPS Main Menu will display the
following screens:
SNO Receiver Serial # (display only)
VER Receiver Firmware (display only)
WAS Waas Satellite PRN (allows setting PRN on RPR 110W and RPR 115 Invicta
Receivers).
Press SELECT button, ‘SET PRN’ screen will be displayed.
Press SELECT button to select PRN #’s between 120 to 138 or OFF.
Press MENU to send changes to Invicta Receiver.
TRK Tracking Status SYN (Synchronized) or SRH (Searching) (display only)
SNR Signal to Noise Ratio (display only)
PPR Parity Pass Ratio % (display only)
CPM Corrections Per Minute (display only)

Table of Contents