Erasingawaypointgroup
Beforeyoucaneraseawaypointgroupyoumust
moveoreraseallthewaypointsassignedtothat
group.
WiththeWaypointGroupdisplayed:
1.Selectthewaypointgroupthatyouwanttoerase.
2.SelectEraseGroup.
Thegroupisdeletedfromthesystem.
Waypointinformation
Whenyoucreateawaypoint,thesystemassigns
informationregardingthelocationmarked.Youcan
viewandeditthedetailsofanywaypointthathas
beencreatedandstored.
Thefollowinginformationisassignedorcaptured
foreachwaypoint:
•Symbol(adefaultsymbolisassigned,oryoucan
selectanalternative.)
•Name(adefaultnameisassigned,oryoucan
selectanalternative.)
•Position(LatitudeandLongitudeofthewaypoint.)
•BearingandRange(Bearingandrangefrom
vessel.)
•Temperature(requiresappropriatesensor,only
forwaypointscapturedatthevesselposition.)
•Depth(requiresappropriatesensor,onlyfor
waypointscapturedatthevesselposition.)
•Dateandtime
•Comment(youcanaddyourowntextcomments
toawaypoint.)
Fromthewaypointinformationpageyoucanalso
performthefollowingactions:
•Goto(Startactivenavigationtothewaypoint.)
•ShowonChart(Showthewaypointlocationin
thechartapplication.)
•Delete(Deletethewaypointfromthewaypoints
list.)
Displayingthewaypointlist
Fromanyapplication:
1.SelectWPT.
2.SelectWaypointList.
Thewaypointlistisdisplayed.
Note:Thewaypointlistcanalsobeaccessed
directlyfromtheHomescreenbyselectingWPT.
orbygoingtotheMyDatamenuandselecting
WaypointList.
Editingwaypointdetails
WiththeWaypointListdisplayed:
1.Selectthewaypointyouwanttoedit.
Thewaypointinformationpageisdisplayed.
2.Selecttheeldyouwanttoedit.
3.Usetheon-screenkeyboardtomakethe
changes,thenselecttheon-screenkeyboard's
SAVEbutton.
Editingawaypointusingthecontextmenu
Withtheapplicationpagedisplayed:
1.Selectthewaypointsymbolon-screen.
Thewaypointcontextmenuisdisplayed.
2.SelectEditWaypoint.
Theeditwaypointdialogisdisplayed.
3.Selecttheeldyouwanttoedit.
4.Usetheon-screenkeyboardtomakethe
changes,andthenselecttheon-screen
keyboard'sSAVEkey.
Movingwaypoints
Movingawaypointusingthecontextmenu
Withtheapplicationpagedisplayed:
1.Selectthewaypointsymbolon-screen.
Thewaypointcontextmenuisdisplayed.
2.SelectMoveWaypoint.
3.Selectthenewpositionforthewaypoint.
Movingawaypointbyenteringnewcoordinates
WiththeWaypointListdisplayed:
1.SelectAllWaypoints.
2.Selecttherelevantwaypoint.
Thewaypointinformationpageisdisplayed.
3.SelectthePositioneld.
4.Usetheon-screenkeyboardtomakethe
changes,andthenselecttheon-screen
keyboard'sSAVEkey.
Erasingwaypoints
Erasingawaypointusingthecontextmenu
Withtheapplicationpagedisplayed:
1.Selectthewaypointsymbolon-screen.
Thewaypointcontextmenuisdisplayed.
212
aSeries/cSeries/eSeries