Raymarine autopilot control unit User Manual

16 ST7001+ Autopilot Control Unit - Owner’s Handbook
2 Basic Operation
Contrast
To set the contrast level for the ST7001+ display:
1. With the autopilot in Standby mode, press the
disp key for one
second to access the
LAMP screen.
2. Press the
disp key for one second again, to display the CONTRAST
screen.
3. Use the
up and down arrow keys to set the required contrast level
(from
1 to 15).
4. The display automatically returns to the previous mode if you do
not press a key for 10 seconds:
• if you press another mode key within 10 seconds you will
select the mode assigned to that key (for example:
auto
selects Auto mode, standby selects Standby mode)

Raymarine autopilot control unit Specifications

General

Brand	Raymarine
Model	autopilot control unit
Category	Marine Equipment
Language	English