Chapter 3: Advanced Operation 33
3 Advanced Operation
Responding to a Watch warning
To respond to a Watch warning:
• press
auto to silence the warning and reset the timer to 4 minutes
or
• press any other key to silence the warning, reset the timer and
perform that key’s normal function
Note: You cannot engage Auto mode directly when the
WATCH screen
is displayed – pressing
auto will only reset the Watch timer. If you
want to enter Auto mode, you must first exit the
WATCH screen
(see below).
Exiting the Watch screen
To exit the Watch screen:
• press
disp to display a different data page
or
• press
standby
Warning messages
Shallow warning (SHALLOW)
The ST7001+ shows the Shallow warning if it receives a shallow
depth message from an instrument on the SeaTalk system. Press
standby or disp to cancel the warning.
Man Overboard warning (MOB)
The ST7001+ activates the Man Overboard warning if it receives a
man overboard (MOB) message from another instrument on the
SeaTalk system. It displays the text
MOB instead of the waypoint
number for the
XTE, DTW and BTW data pages.
To Next Page
Loading...
Need help?
General
