Chapter 6: Commissioning the Autopilot 69
6 Commissioning the Autopilot
x4
2 sec
D5480-1
To prepare for the AutoLearn:
• steer straight ahead at cruising speed
(planing boats – off the plane)
• head into wind and waves
Check you have sufficient
clear sea space before proceeding
AutoLearn in progress
AutoLearn successful
Note: If you see a
LRN FAIL message,
press disp to return to
the AUTOLEARN screen
then repeat from Step 2
After
7 to 27
steps
2 sec
x2
If you need to cancel the AutoLearn, press or
!
AutoLearn calibration
Enter Seatrial Calibration
1
Start the AutoLearn
2
Boat completes AutoLearn
3
Save new settings
4
To:
• save AutoLearn calibration settings
• return to STANDBY mode
To Next Page
Loading...
