10
• Return to previous menu or dialog.
6.
OK — Confirms menu selections, opens context menus
• Press to confirm a currently highlighted option.
• Press to open context sensitive menus in the Chart and
Fishfinder apps.
7.
Minus (Zoom / Range out)
• Press to increase the area displayed onscreen in the Chart app.
• Press to decrease the zoom level in the Fishfinder app, when in
Zoom mode.
• Press to revert to scrolling mode from lowest zoom level in the
Fishfinder app.
8.
Plus (Zoom / Range in)
• Press to decrease the area displayed onscreen in the Chart app.
• Press once to initiate Zoom mode in the Fishfinder app,
subsequent presses will increase the zoom level.
9. Quicklaunch 1 / Quicklaunch 2 / Quicklaunch 3
• Press to open the assigned app page.
• Press and hold to assign the quick launch button to the app
page currently highlighted on the Homescreen.
10. Power
• Power on — Press and hold until the display beeps
(approximately 2 seconds).
• Shortcuts menu — Press once to open the shortcuts menu.
• Power off — Press and hold until the display turns off
(approximately 5 seconds).
• Power off — Press to open the Shortcuts menu and then select
Power down display.
Startup wizard
The first time the display is powered up, or after a
Factory reset the
Startup wizard is displayed.
The Startup wizard helps you to configure the following display
settings:
• User interface language
• Boating activity
• Boat details including:
– Safety clearances
– Number of engines
To Next Page
Loading...
