44
• Pressing the Waypoint button will place a waypoint at the cursor’s
location.
• Pressing the
Plus or Minus buttons will range in and range out
respectively, centered around the cursor position.
• Pressing the
Back button will re-center the vessel icon and switch
back to Motion mode.
Selecting a chart card
You can use LightHouse™ charts and compatible Navionics and C-MAP
electronic charts. The electronic chart cards must be inserted into
your display’s MicroSD card reader.
From the Chart app:
1. Press the Menu button.
2. Select the
Settings icon.
Pressing the Directional pad’s Up button once the menu opens will
move the selection to the bottom of the menu and highlight the
settings icon.
3. Select the cartography that you want to use from the Cartography
tab.
The menu will close and the Chart app will display your chosen
cartography.
To Next Page
Loading...
