62
1. Select Pair with Quantum from the This display tab: Homescreen
> Settings > This display > Quantum Radar: > Pair with Quantum.
2. Enter the SSID and passcode for your Quantum™ radar.
3. Select Connect.
4. Follow any onscreen instructions to continue pairing with your
Quantum™ radar.
The pairing process may take several minutes to complete.
For more information on the Quantum™ radar pairing process
(including troubleshooting information), refer to your Quantum™
radar documentation.
8.2 Opening the Radar app
The Radar app is opened by selecting a page icon from the
homescreen that includes the Radar app.
Pre-requisites:
1. Ensure your radar scanner is compatible, check the latest details
available on the Raymarine website, if in doubt please contact an
authorized Raymarine dealer for advice.
2. Ensure you have installed your radar scanner in accordance with
the documentation that was supplied with your Radar.
The Radar app will open in one of the following states:
To Next Page
Loading...
