64
Transmitting
If your radar scanner is connected, powered up and transmitting
then the radar image is displayed and echoes returns are displayed
onscreen.
Putting the radar into standby
With your selected radar displayed onscreen:
1. Select
Transmit from the main menu.
The radar scanner will stop transmitting and is put into standby
mode.
Powering down your radar scanner
With your radar scanner in standby mode:
1. Select the
Off icon.
2. Select Yes to confirm power down.
The radar scanner will still consume a small amount of power whilst
it is powered off, this is to ensure the radar can be powered back
up quickly.
To Next Page
Loading...
