37
3. Select the location for the second waypoint.
The 2 waypoints will be joined by a line, creating the first leg of
your route.
4. Select the location for the subsequent waypoints, required to
complete your route.
5. When your route is complete press and hold the
OK button and
then select Finish build from the context menu.
The finish route build notification is displayed.
6. From the notification you can either:
• Select
Follow to immediately start following the route, or
• Select
Follow in reverse to follow the route in reverse waypoint
order, or
• Select
Route plan to view the route plan menu, or
• Select
Exit to return to the Chart app.
Note:
You can press the
Back button at anytime during route building to
remove the last waypoint you placed.
Route management
Routes are managed using the routes and tracks menu.
The
Routes & Tracks menu can be accessed from the Homescreen
and from the Chart app: Homescreen > Routes & Tracks, or Chart
app > Menu > Routes & Tracks .
When the routes and tracks menu is opened the routes menu is
displayed by default.
To Next Page
Loading...
