21
2. Select Check online from the pop-over menu.
If you do not have an active internet connection then you will be
requested to create one.
3. To set up a Wi-Fi connection select
Wi-Fi settings and connect to
the required Wi-Fi access point/hotspot.
4. Select Start.
A list of available products is displayed. The list will include
your display and products that are connected to the SeaTalkng ®
backbone.
Software update list example
5. Select each device that you want to update.
If a notification is displayed asking if you want to reinstall the
current software version, unless you are experiencing problems
with the product select
No, otherwise select Yes and the current
version of software will be reinstalled.
6. When all relevant products have been chosen, select Update
selected to commence the software update process.
7. Wait for the update process to complete.
8. Select
Exit.
Note:
Your products may reboot automatically as part of the update
process.
To Next Page
Loading...
