47
1. Select Settings.
2. Select the Alarms tab.
3. Select the
Arrival radius: setting field.
4. Adjust the distance to the desired value.
5. Press the
Back button to return to the alarms menu.
Note:
The waypoint arrival alarm can be disabled or enabled using the
Waypoint arrival: toggle switch.
Restarting cross track error (XTE)
A cross track error (XTE) occurs when your actual route diverges from
your original planned route. Restarting XTE plots a new course directly
from your current position to your destination, rather than continuing
to follow the original planned route.
1. Select
Restart XTE from the Navigation menu: Menu > Navigation
> Restart XTE.
Following a Route
Follow the steps below to navigate a saved route.
From the Chart app, with the route displayed onscreen:
1. Select a route leg.
The route context menu is displayed.
2. Select
Follow route to follow the route from start to finish.
Alternatively you can select Follow route from the route pop-over
menu, accessed from the Routes menu.
Menu > Routes & Tracks >
Routes > <Route name> > Follow.
To Next Page
Loading...
