34 RAYDATA Installation and Operation Handbook
The display shows a calibration value of 1.00 (no calibration factor).
5. Use the
ÙÙ
ÙÙ
Ù
key to increase or the
ÚÚ
ÚÚ
Ú
key to decrease the value as
required.
6. Press
ÚÚ
ÚÚ
Ú
and
ÙÙ
ÙÙ
Ù
together to set the new value. Alternatively, press
NAV to cancel all changes.
The last-used Setup page is displayed. Press NAV and
ÙÙ
ÙÙ
Ù
together
to return to normal operation.
To Next Page
Loading...
