Raymarine SmartPilot X-Series User Manual

34 SmartPilot X-Series Commissioning & Setup Guide
4. You will then see the VESSEL (vessel type) screen:
• Hold down
standby for 2 seconds to save the new settings, then turn the SPX
system computer power off and back on.
If you reset the system parameters, you must carry out the SPX system
commissioning again before using the SPX system.
81307_1.book Page 34 Wednesday, December 19, 2007 11:17 AM

Raymarine SmartPilot X-Series Specifications

General

Brand	Raymarine
Model	SmartPilot X-Series
Category	Marine Equipment
Language	English