2. Before use
(2) How to Assemble Main Body
DIGITAL INCUBATOR
10
▶ Place Insect house by adjusting tray divider.
▶ Prepare the Insect House egg contained.
▶ Please close the view window.
※ Humidity pad can be purchased separately.
▶ Assemble bottom body, Tray, and Tray hatching pad.
Evaporating ability is different from pad size.
▶ Cut Humidity pad to proper size, and then fix on the view
window with 2 pins included.
※ You can use Humidity pad for about 4 ~ 6 months, but it
can be different depending on water quality.
(DISTILLED WATER is recommended to use.)
Over 60% humidity (Cut to 70mm~75mm)Over 60% humidity (Cut to 70mm~75mm)
Under 50% humidity (Cut to 50mm~55mm)
Under 50% humidity (Cut to 50mm~55mm)
In case that the sight glass isn’t closed completely,
temperature doesn’t go up. Be careful.
Test the incubator to be sure that the incubator works
without any problem before placing eggs in the incubator.
Please ensure you remember how to use the machine
and maybe re-read instructions.
USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Insect Incubator Rcom Max 70 User Manual
To Next Page
Loading...
