3. 부화
(2) How to Assemble Main Body
2. Before use
DIGITAL INCUBATOR
▶ Loose two bolts connecting main controller and view
window. After that, disassemble main controller from
view window by pulling 4 hooks on main controller.
Be careful to ensure the silicone tube is not folded.
▶ Fix silicone tube which is assembled with nipple into the
hole.
Nipple
Do not tighten the bolts too much.
▶ Insert the nipple which is connected with view window to
the hole of main controller, and assemble view window
and main controller with two bolts.
9
USA & Canada Official Sales & Service https://www.R-Com-Hatcher.com
Insect Incubator Rcom Max 70 User Manual
To Next Page
Loading...
