Introduction Kits And Accessories
7
Figure 4. Submersible DEF Pump Dimensions/Tank Installation W/Adjustable Bypass Pressure Relief Assembly
Kits And Accessories
The submersible pump system is designed to operate as a complete solution for UST applications. The tote
applications will require custom fabrication and installation of the piping systems by the contractor. The
contractors should be aware of material compatibility and use only fittings, sealants and plumbing compatible with
DEF per ISO 22241.
Bottom of
UMP to bottom
of bulk head
B
6
7
5
4
3
2
1
8
10
D1 - W/O fixed pressure relief - 3/4 HP
D2 - W/O fixed pressure relief - 3/4 HP
D1 - W/O fixed pressure relief - 2 HP
D2 - W/O fixed pressure relief - 2 HP
DESCRIPTION RETRACTED
PUMP LENGTH (‘A + ‘B’)
EXTENDED
MIN. 6” SUBMERSION
MIN. 3” CLEARANCE
9
A
ITEM DESCRIPTION
1 UMP
2 Nipple - Hex 1.25” SST
3 Reducer Bushing
4 UMP Cable
5 Zip Ties
6 1-1/2” Pipe
7 Clinch Fitting Ass’y.
8 2” Pipe
9 Manway
10 1/2” NPT Strain Relief w/customer
supplied reducing bushing as
required
66.0” (1676mm)
96.0” (2438mm)
73.0” (1854mm)
103.0” (2616mm)
97.0” (2464mm)
157.0” (3988mm)
104.0” (2642mm)
164.0” (4166mm)
To Next Page
Loading...
