EasyManua.ls Logo

RED DSMC SIDE HANDLE - Page 37

RED DSMC SIDE HANDLE
94 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REDVOLT XL MODULE CONNECTIONS
Figure: REDVOLTXL Module
# CONNECTOR CONNECTOR TYPE CONNECTORFUNCTION
1 AUX POWER
OUT - 3.8 A
2-pin 0B LEMO Provides 3.8 A max current out for 2-pin based accessories
when the module is receiving power
2 CHARGE IN 6-pin 1B LEMO Provides power to the REDVOLT XL Module, the AUX
POWER OUT port, and an approximate 2 A charge current to
an attached REDVOLT XL battery
AUX POWER OUT
The 2-pin 0B LEMO AUX POWER OUT port provides a maximum 3.8 A of current for camera accessories.
NOTE: The AUX POWER OUT port is always active whenever a REDVOLT XL battery is attached to the module,
regardless of camera state or presence of a DC power source.
Figure: Front Face of AUX POWER OUT Connector
2-PIN 0B LEMO AUX POWER OUT CONNECTOR
PIN SIGNAL DESCRIPTION DIRECTION
1 GROUND Common ground N/A
2 +11.5 to +17 VDC +11.5 to 17 VDC unregulated battery pass-through power Out
NOTE: Mating connector is EEG.0B.302.CLL.
C OPYRI G HT © 2017 RED.C OM , LLC 955- 0038, REV-AD| 37
RED DSMC POWER OPERATION GUIDE

Table of Contents

Related product manuals