To Next Page

To Previous Page

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-H | 102

 : Export selected preset from camera to SSD.

 All : Export all presets from camera to SSD.

 : Import selected preset from SSD to camera. You will be asked if you want to apply the preset.

 All: Import all presets from SSD to camera. You will be asked if you want to apply the preset.

CREATE PRESETS

1. Set up the camera how you want the preset to be configured.

For example, if you want to create a preset specifically for your zebra indicators, first go to Settings >

Display > Zebra and configure your zebra indicators the exact way that you want them to be in the preset.

2. Go to Presets > Camera Presets.

3. Select Create, or select an existing preset and select Clone or Update.

4. If creating a new preset, enter a name for the preset and click OK.

5. Select the following tabs to display different sets of preset options: Display, Key, Look, Project, and System.

6. Select the following:

‒ : Add selected setting to the preset.

‒ All : Add all settings to the preset.

‒ X: Remove selected setting from the preset.

7. Select Create.

The preset is saved and stored in the camera.

LOOKS

A Look is made up of the following settings: Color, Gain, FLUT, Curves, Color/Gamma, Color Temperature.

These settings are configured either in-camera (in the Settings > Look menu) or in REDCINE-X PRO (in the

Looks panel).

CREATE AND MANAGE IN-CAMERA LOOKS

Create in-camera looks in the Presets > Camera Presets tab. You can apply, create, update, clone, delete, and

export these in-camera Looks the same way you would with any of the other presets created in the Camera

Presets tab. For more information about creating and managing presets and in-camera Looks, go to “Camera

Presets” on page 101.

IMPORT LOOKS FROM REDCINE-X PRO

1. While your SSD is mounted to your computer, create a folder on the SSD called Looks.

2. Save your RMD files (that have been exported from REDCINE-X PRO) to the Looks folder on the SSD.

3. Eject the SSD from your computer.

4. Mount the SSD to your DSMC.

5. Go to Presets > Looks.

6. Select one of the following:

‒ : Import selected Look from SSD to camera.

‒ All: Import all Looks from SSD to camera.

For more information about creating and exporting Looks from REDCINE-X PRO, check out the “REDCINE-

X PRO: Saving Looks to Camera” video tutorial, available at www.red.com/learn/workflow/redcine-x-saving-

looks-camera.

RED DSMC User Manual

Questions and Answers: