EasyManuals Logo

RED DSMC User Manual

RED DSMC
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
RED DSMC OPERATION GUIDE
COPYRIGHT © 2014 RED.COM, INC
955-0020_V5.1, REV-H | 95
FOCUS MENU
MODE TAB
The Focus Menu is used to enable and select Focus parameters, including Mode, Zone, Size, and Enhanced
A/F.
MODE
Select one of the following from the Mode drop-down menu:
Manual: When selected, all focus operations are manual.
Confirm: Enables the Center or Spot focus target. This mode provides additional focus assistance by us-
ing red, yellow, and green color changes to the focus spot window. Inadequate subject illumination and/or
contrast may interfere with normal Focus Confirm operation.
For best results with Focus Confirm, you should “rock” the focus ring: Focus through the point of optimum
focusing and back again in decreasing amplitude, as when “zeroing-in” for precision manual focus.
AUTOFOCUS MODES (DSMC NIKON AND CANON MOUNTS)
When you have any of the following conditions, there are additional options in the Modes drop-down menu:
DSMC Nikon Mount and a supported lens is attached. The lens focus switch is set to “A” or “M/A”.
DSMC Canon Mount and a supported lens is attached. The lens focus switch is set to “AF”.
DSMC Canon MOTION MOUNT and a supported lens is attached. The lens focus switch is set to “AF”.
When any of the conditions above are met, you have the additional following options in the Modes drop-down
menu:
Single: When you press the key mapped to AF: Start, the camera performs single-shot AF. Optimized for
rapid focus even under low-contrast conditions. Works with both Center and Spot zones.
Continuous: When you press the key mapped to AF: Start, the camera attempts to keep objects in the target
in focus. Works best with good lighting and contrast. Works with both Center and Spot zones.
Touch Track: Dynamically updates a positionable AF point using the touchscreen. Only works with Spot
zone. Keep Spot target on subject while moving across frame, as the lens continuously focuses on that
target.
Rack: Enables rack focus. Only works with Spot zone. For more information about configuring rack focus,

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the RED DSMC and is the answer not in the manual?

RED DSMC Specifications

General IconGeneral
BrandRED
ModelDSMC
CategoryDigital Camera
LanguageEnglish

Related product manuals