COPYRIGHT © 2014 RED.COM, INC
RED DSMC OPERATION GUIDE
955-0020_V5.1, REV-H | 84
4. There are two ways to start the lens calibration process:
‒ When you attach a lens that the camera does not recognize as being fully electronically supported, the
“Unsupported Lens Found” dialog box displays and asks if you want to calibrate the lens. Select Create
Custom Lens Config.
‒ Go to Settings > Maintenance > Calibrate > Lens and select Create....
The lens calibration process for the current focal length starts and a progress bar displays. Once the cali-
To Next Page
Loading...
Need help?
General
