To Next Page

To Previous Page

RED DSMC OPERATION GUIDE

955-0020_V5.1, REV-H | 86

B. Select the calibration file name in the Camera list and select Edit....

C. Manually set the next focal length.

D. Select Add Cal @ xx..., where “xx” is the current focal length.

NOTE: If you calibrate a focal length that has already been calibrated, the new files overrides the previ-

ous file.

The lens calibration process for the current focal length starts and a progress bar displays. Once the

calibration process starts, DO NOT touch the lens, as doing so may cause the lens to calibrate incor-

rectly.

Questions and Answers:

Need help?

Do you have a question about the RED DSMC and is the answer not in the manual?

RED DSMC Specifications

General